- Stationary Analyzer Systems
- Certified systems
- FTIR multi-gas CEM
- CVAF mercury CEM
GT6000 Mobilis Portable stack gas and emission analyzer
- Intuitive user interface and ergonomic design
- Easy to disassemble, carry, and set-up again
- Multigas measurements in a portable package
Continuous Emission Monitoring CEMS System II
- TÜV and MCERTS certified
- QAL1 / EN 15267-3
- Total Organic Carbon measured with FTIR
- Low maintenance requirements
Continuous Mercury Monitoring system (CMM)
- (Continuous Mercury Monitor) is designed for continuous & unattended monitoring of total mercury (Hg) in flue gas.
- Low detection limit
- Simple to use
- Reliable system operation
- Low maintenance requirements
GFID Analyzer
- Designed for continuous total hydrocarbon (THC) measurements
- TÜV certified solution (QAL1) for measuring pollutants from hot, wet and corrosive gas streams.
- Measurement based on flame ionization detection; certified measuring ranges from 0-15 to 0-500 mg/m3
- Integrated to the Gasmet EN 15267 certified Continuous Emission Monitoring System CEMS ll ef and used in fully automatic mode
Multipoint Sampling System
- On-line measurements, ideal to measure components in ambient conditions
- Wall mounted stainless steel case includes all valves, a flow meter, a pump and a filter.
- Standard includes four (4) sample gas input lines and one pump.
- Function of the MSS is fully automatic, controlled by Calcmet software.
- Option for MSS to be equipped up to 32 sample gas input lines and with a second sample gas pum
Portable Sampling Unit
- The Gasmet Portable Sampling Unit has been designed for protable emission monitoring measurements.
- Used for on-site maintenance
- Measures trace concentrations of pollutants in wet, corrosive gas streams
- Sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are located in a module that is heated to 180 degrees C.